Home> Company News> O/W vs W/O Emulsifiers: How to Choose for Cosmetics

O/W vs W/O Emulsifiers: How to Choose for Cosmetics

2026,11,21
I.Why does the O/W and W/O emulsification system affect cosmetic formulas?
 
In the development of cosmetic formulas, emulsification is a very common link.Face creams, lotions, sunscreens, makeup remover creams, and body care products may all involve a combination of oil and water.Among them, O/W and W/O are the two most common emulsifying systems in the cosmetics industry.
 
The O/W system disperses oil droplets in a continuous aqueous phase, while the W/O system disperses water droplets in a continuous oil phase.The difference between the two lies not only in who is the continuous phase of oil and water, but also in the viscosity, spreadability, freshness of the product, and the adaptability of the formula to different raw materials.
 
II. What is the O/W emulsification system?
 
O/W is the abbreviation of Oil-in-Water. In this structure, water is a continuous phase, and grease is dispersed in the aqueous phase in the form of fine droplets.Many lotions, moisturizing creams and body creams that consumers come into daily contact with use this method of emulsification.
 
Since the aqueous phase occupies a continuous structure, O/W products are usually easier to form a light and soft texture.During the application process, the formula is easy to spread out, and it is relatively easy to show a refreshing feeling after use.Therefore, this system is widely used in the development of daily skin care products.
 
From the perspective of formula design, the O/W system has several obvious characteristics.
 
It is more suitable for products with a higher proportion of water phase.Glycerin, moisturizers, water-soluble active ingredients and other aqueous raw materials can be added according to product positioning to achieve a balance between moisturizing and skin feeling.
 
The skin feeling adjustment space of the O/W system is relatively large.By changing the type of oil, the combination of emulsifiers, and the thickening system, different textures from light emulsions to relatively heavy creams can be developed.
 
O/W products usually have good convenience for daily use and are suitable for facial care, body care and some cleaning products.
 
When choosing raw materials, you can refer to different types of o/w emulsifiers, such as Mingya OILREE® MY965-B's peg-100 stearate and glyceryl sterate complex ligand system, with an HLB value of 10.5, which can be used in oil-in-water creams and emulsion formulas.
 
III.What is the W/O emulsification system?
 
W/O is the abbreviation of Water-in-Oil. Unlike O/W, the oil phase in the W/O system is a continuous phase, and water is dispersed inside the oil phase in the form of fine droplets.This structure makes W/O emulsified products significantly different from O/W in terms of skin texture and usage characteristics.W/O products are easier to moisturize, silky and relatively heavy to use.Since the oil phase forms a continuous structure, it is also suitable for some formulas that require higher oil content or special film-forming performance.
 
The W/O system also has its own characteristics in the formula design.
 
It is more sensitive to the composition of the oil phase.Since the oil phase is a continuous phase, the polarity, viscosity, spreadability of the grease, and the compatibility between different greases will all affect the state of the final product.
 
The W/O system needs to choose an Emulsifier that is suitable for its structure.If the hydrophilic and oleophilic characteristics of the emulsifier do not match the formula, the water droplets may not be effectively dispersed in the oil phase, thereby increasing the risk of stratification or demulsification.
 
The skin texture adjustment of W/O products requires comprehensive consideration of oils and auxiliary structural raw materials.Simply increasing the amount of emulsifier does not necessarily obtain the ideal stability and sense of use.For example, Mingya's OILREE® MY940 peg-40 Hydrogenated castor oil can participate in complex ligand systems as a nonionic emulsifying related component.It has a certain compatibility space and can be used in combination with other emulsified components in the actual formula.
 
Oil in water emulsifier
 
IV.What is the influence of HLB value on the choice of emulsifier?
 
HLB is a hydrophilic and oleophilic equilibrium value, which is used to describe the overall preference of surfactants for hydrophilic or oleophilic characteristics.Under normal circumstances, emulsifiers with higher HLB values are more hydrophilic and are suitable for many O/W emulsifying systems; emulsifiers with lower HLB values are more oleophilic and are commonly used in W/O systems.
 
However, the HLB value is not the only basis for choosing an emulsifier.In the actual formula, even if the two emulsifiers have similar HLB values, there may be differences in their chemical structure, interfacial adsorption capacity, the characteristics of forming interfacial membranes, and the compatibility with other raw materials.
 
For example, OILREE® MY965-B has an HLB value of 10.5, which is suitable for screening in oil-in-water emulsified formulas.For other emulsifiers, it is necessary to further understand their INCI composition, product morphology and recommended application direction.
 
V.The type of grease will also affect the stability of the emulsifying system
 
There are differences in polarity, viscosity, spreadability and melting point of different greases.Even if the same emulsifier is used to replace a certain raw material in the oil phase, the final state of the product may be changed.
 
For example, Mingya's NSOAF™IPM Isopropyl myristate is a common lightweight ester emollient with good spreading properties and can help the formula adjust the sense of use of the oil phase.In the lightweight emulsion, the heavy feeling caused by the oil combination can be improved.
 
OILREE® MY916 CETYL PALMITATE and OILREE® MY914 MYRISTYL MYRISTATE are fatty acid ester raw materials with certain structural characteristics and can participate in the oil phase structure design of cream formulas.
 
If the oil phase contains more solid or semi-solid raw materials that are easy to crystallize, and the emulsified interface structure is not stable enough, problems such as particles, roughness, and even oil-water separation may occur during storage.
 
In addition, OILREE® MY720 TRIHYDROXYSTEARIN can be used for oil phase structure adjustment.It can form a certain mesh structure inside the oil phase, restrict the flow and aggregation of oil droplets, and play an auxiliary role in reducing the risk of oil precipitation during long-term storage.
 
Water in oil emulsifier
 
VI. How should the emulsification system be selected for different cosmetic applications?
 
1. Facial lotion and daily moisturizing cream
 
For daily use of facial lotions and moisturizing creams, the O/W system is usually a more common choice.
 
Such products usually need to take into account moisturizing ability, ductility and comfort after application.Products of different viscosities and textures can be developed by adjusting the ratio of the aqueous phase, the type of grease and the combination of emulsifiers.
 
For example, with an appropriate amount of OILREE® MY EG-26 glycereth-26, it can help the formula increase moisturizing properties, while paying attention to the impact of changes in the composition of the aqueous phase on the overall emulsifying system.
 
2. Highly moisturizing creams and special care products
 
For products that require a higher oil ratio or tend to moisturize the skin, the W/O system can be used as a development direction.
 
Such formulas usually need to pay more attention to the continuous structure of the oil phase, the oleophilic characteristics of the emulsifier, and the compatibility relationship between different oils and fats.
 
3. Makeup remover products
 
The emulsifying design of makeup remover products is different from ordinary moisturizing creams.Makeup remover oil and makeup remover cream not only need to consider the stability of the product during storage, but also need to pay attention to the emulsification performance after encountering water, the ability of oil to dissolve makeup, and the skin feeling after rinsing.
 
For such products, emulsion-related components such as OILREE® MY928 peg-80 sorbitan laurate can be used to design a cleaning system in combination with other oils and surfactants.
 
4. Moisturizing and primer products before makeup
 
Base makeup products also have some special requirements for the emulsification system.In addition to the basic oil-water stability, it is also necessary to consider the dispersion of the powder, the smoothness of application, and the subsequent makeup effect.
 
Mingya's OILREE® MY9176 peg/ppg-17/6 copolymer can be used as a related auxiliary raw material in the formula to adjust the product's spread and use experience.
 
For products such as Makeup moisturizer that take into account the needs of moisturizing and base makeup, if the emulsifying system is too heavy, it may affect the subsequent spreading of the powder; if the oil phase and the emulsifying structure are not matched unreasonably, the powder may clump or be applied unevenly.
 
Summary
 
O/W and W/O are two important emulsification methods in cosmetic formulas.The O/W system uses the aqueous phase as the continuous phase, which is usually suitable for daily lotions and many moisturizing creams; the W/O system uses the oil phase as the continuous phase, which is more suitable for some high-moisture and special care formulas.
 
Both have their own characteristics in structure, skin feeling, raw material selection and application direction.
Contact Us

Author:

Ms. ycmy

Phone/WhatsApp:

+86 18620409116

Popular Products
You may also like
Related Information
Asia's Top 10 Oil in water emulsifier Brand List

**Oil in Water Emulsifier** – Achieve seamless blending with our high-performance emulsifier! Perfect for cosmetics, food, and industrial applications. Ensures stable, uniform dispersion of oil in...

Top 10 Most Popular Chinese Oil in water emulsifier Brands

**Oil in Water Emulsifier: Industry Situation** The oil-in-water emulsifier market is surging, driven by demand in food, cosmetics, and pharmaceuticals. Rising consumer preference for clean-label...

Ten Chinese Cationic conditioner Suppliers Popular in European and American Countries

Cationic Conditioner: The secret to silky, manageable hair! Lightweight, instantly softens strands, reduces frizz & enhances shine. Ideal for all hair types—especially dry or damaged hair. Say...

China Top 10 Cosmetics Ingredients Suspension Brands

**Cosmetics Ingredients Suspension** Unlock flawless formulations with our advanced suspension technology. Ensure even distribution of active ingredients for consistent, effective results. Ideal for...

Related Categories

Email to this supplier

Subject:
Email:
Message:

Your message must be between 20-8000 characters

I. Company Overview   Hubei Mingya New Materials is a China-based manufacturer and supplier specializing in cosmetic and personal care functional ingredients. With years of experience in the beauty and personal care industry, we focus on providing formulation-oriented ingredient solutions that help global cosmetic brands, contract manufacturers, and R&D laboratories develop stable, high-performance, and consumer-friendly products.   Unlike trading companies or single-product suppliers, we integrate production, application development, and technical support to serve as a reliable ingredient partner in the personal care industry.   II. What We Do   We supply a full range of cosmetic functional ingredients, including:  Emulsifiers for O/W and W/O emulsions, Solubilizers for clear formulations and fragrance systems,  Emollients and synthetic oils for skin conditioning,  Silicone elastomers for smooth texture and sensory enhancement,  Conditioning agents for hair care applications,  Acrylic rheology modifiers for gel and cream systems.   Our materials are widely used in:  Skincare products (creams, lotions, serums) ; Hair care products ( shampoos, conditioners, treatments);...
Copyright © 2026 Hubei Mingya New Material Technology Co., Ltd. All rights reserved. Privacy Policy
Copyright © 2026 Hubei Mingya New Material Technology Co., Ltd. All rights reserved. Privacy Policy
We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send